DCF type safety ceramic capacitor 103M
What are the requirements for the production of large-capacity capacitors? What standards must be met?
Introduction: Large-capacity capacitors are used more in real life. With the gradual change of the surrounding environment, more and more places have put forward higher requirements for capacitors. This requires the capacitor to have a relatively large capacity during actual production. Only in this way can it bring better protection. What are the requirements for large-capacity capacitors during production?
(1) Temperature standard setting
In the actual setting process of large-capacity capacitors, the standard requirements for temperature are relatively high. Generally speaking, the temperature of 45°C is the most important. Once this temperature is exceeded, it will have a higher impact on the capacitor. Basically, ordinary capacitors may be sealed in a cabinet, and the temperature may be higher, which will cause the capacitors to overheat or cause expansion under high temperature conditions. With special capacitors, basically in a state where the natural temperature is above 38°C and the power distribution is higher, everything will run very well.
(2) Select environment settings
Large-capacity capacitors will have a series of settings for the final selection environment. In dusty occasions, this capacitor can be completely selected. Judging from the current situation, many products have relatively short lifespans in this environment. Therefore, when choosing capacitors, we should fully consider special products that are anti-dust or anti-static.
(3) Different voltage levels
Large-capacity capacitors are basically used in different environments, and the voltage level requirements will also be different. The voltage in many areas is not particularly stable, and the voltage may be too high or too low. In this case, the power or capacitor will have some impact.
What factors should be considered when producing large-capacity capacitors? The above requirements are very important.
